Heavy-Duty Machine Automation & Signal Conversion Solutions
Since 1991, Axiomatic Technologies Corporation has designed and manufactured industrial-grade electronic control units (ECUs), CAN bus I/O modules, and proportional valve controllers. Built under an ISO 9001:2015 quality standard in Canada, our automation products survive extreme temperatures, high vibration, moisture, and harsh electromagnetic interference (EMC) in off-highway, agricultural, mining, and industrial machinery.
I/O Controls & Signal Converters
Universal analog and digital signal converters bridging discrete sensors, resistive sensors, LVDT/RVDT, strain gauges, and magnetic pickups directly into SAE J1939, CANopen, or Modbus networks.
Engine Temperature Monitoring
High-density thermocouple (TC) scanners, resistance temperature detector (RTD) modules, and PTC thermistor scanners delivering real-time, isolated thermal telemetry over CAN bus for large engines and generator sets.
Hydraulic Valve Drivers & Amplifiers
Proportional solenoid amplifiers, H-Bridge controllers, plug-in DIN 43650 drivers, and near-field communication (NFC) programmable valve controllers for precise fluid power motion control.
Explore Complete Industrial Automation Categories
Browse our field-tested controller families engineered for quick integration with global OEM machinery architectures.
Signal Input & Output CAN Controllers
Off-the-shelf single and multi-channel input/output controllers designed for rugged vehicle networks. Featuring high-resolution A/D conversion, configurable signal conditioning, and relay or solid-state drivers.
- 1, 4, 10, and 20 Universal Signal Input CAN Controllers
- CAN-to-Relay, Sine/Square Wave, and Resistive Output Modules
- Multi-Channel Strain Gauge & Wire-Break Detection ECUs
- Modbus TCP/IP & Ethernet-Integrated I/O Controllers
Proportional Valve & Solenoid Drivers
Rugged hydraulic control electronics designed for proportional directional valves, variable displacement pumps, and soft-shift solenoids with selectable dither and programmable ramps.
- DIN 43650A Direct Plug-in Solenoid Amplifiers
- CAN-to-Outputs Valve Controllers (1 to 12 Outputs)
- Encoder Input & Dual Servo Valve Controllers
- NFC-Enabled Wireless Configurable Valve Drivers
Engine & Exhaust Thermal Scanners
Engine management accessories engineered to withstand engine-mount vibration while continuously scanning cylinder head temperatures, exhaust gas temperatures (EGT), and bearing points.
- 20-Channel Thermocouple (K, J, T type) CAN Scanners
- RTD Temperature Monitoring Modules (Pt100 / Pt1000)
- PTC Thermistor Scanners for Electric Motor & Genset Protection
- Individual Channel Galvanic Isolation & Fault Detection
DIN Rail Mount Signal Converters
Compact panel-mount signal isolation and conditioning modules for industrial control cabinets, marine switchboards, and stationary engine control panels.
- 0-5V / 0-10V / 4-20mA to PWM Signal Converters
- 3-Way Isolated Universal Signal Conditioners
- LVDT / RVDT Position Sensor Simulators
- Bipolar Input NFC Signal Controllers
Automation Platform Selection Guide
Compare standard technical specifications across Axiomatic automation platform series for global OEM procurement and system design engineers.
| Product Series | Primary Function | Communication Interface | Operating Temperature | Ingress Protection |
|---|---|---|---|---|
| AX030100 / AX030500 | Universal I/O Controllers | SAE J1939 / CANopen / Modbus | -40°C to +85°C (-40°F to 185°F) | IP67 / IP69K Sealed |
| AX020200 / AX021300 | Proportional Hydraulic Drivers | CAN bus, PWM, 0-5V / 4-20mA | -40°C to +85°C (-40°F to 185°F) | IP67 Sealed Housing |
| AX030340 / AX180400 | TC & RTD Temperature Scanners | SAE J1939 / CANopen | -40°C to +105°C (Engine Mount) | IP67 Aluminium Enclosure |
| AX130200 / AX130500 | DIN Rail Signal Converters | Isolated Analog / PWM / Voltage | -40°C to +70°C (Control Panel) | IP20 DIN Enclosure |
| CAPV / RSD Series | Plug-in Valve Amplifiers | Direct Solenoid Mount / NFC | -40°C to +85°C (-40°F to 185°F) | IP65 / IP67 Integrated |
Tailored Automation Electronics for Global Equipment Manufacturers
When off-the-shelf control modules do not fully match your machine’s mechanical, electrical, or software specification, Axiomatic provides custom OEM electronic development. Our internal engineering control covers hardware design, embedded firmware creation (in Canada and Finland), functional verification, and environmental compliance validation.
- Custom CAN Message Mapping: Pre-programmed SAE J1939 PGNs or CANopen PDO/SDO profiles to reduce OEM assembly commissioning time.
- Harsh Environment Validation: Full in-house verification for shock, vibration, thermal shock cycling, spray ingress, and EMC compliance.
- ISO 9001:2015 Manufacturing: Quality-controlled production in Mississauga, Ontario, Canada with complete serial trace capabilities.
Frequently Asked Technical Questions
Most Axiomatic automation controllers support SAE J1939 and CANopen as standard protocols. Select models also support Modbus RTU, Modbus TCP/IP, Ethernet, Automotive Ethernet, RS-232, and RS-485 interfaces for seamless integration into industrial or commercial vehicle networks.
Yes. Our proportional valve drivers and solenoid amplifiers are universal. They feature software-configurable dither frequency, adjustable PWM frequency, programmable ramps, and closed-loop current feedback compatible with valves from Bosch Rexroth, Danfoss, Parker, Eaton, Sun Hydraulics, and others.
Controllers can be configured using the Axiomatic Electronic Assistant (EA) Windows software tool via a CAN-to-USB converter. Select compact modules also offer Near Field Communication (NFC) setup, allowing wireless parameter configuration via an Android/iOS mobile application or dedicated handheld programmer.
Axiomatic products undergo rigorous environmental qualification, including IP67/IP69K ingress protection, extended operating temperature exposure (-40°C to +85°C or +105°C), high shock (up to 50g), sinusoidal/random vibration testing, and full CE/EMC compliance according to ISO and SAE standards.
Ready to Discuss Your Automation Requirement?
Speak with our application engineering team to select the ideal automation controller or scope a custom OEM electronic solution for your equipment.
Get a Quote