+1 905 602 9270
Rugged OEM Equipment Automation

Machine Control

Home » Products » Machine Control
  • IP67 / IP69KFully Sealed Heavy Equipment Housings
  • SAE J1939CANopen & Analog Output Interfaces
  • 3D GyroDynamic Vibration & Motion Filtered
  • ISO 9001Certified R&D & Manufacturing in Canada
Precision Sensing & Control Solutions

Heavy-Duty Machine Control Electronics for OEM Machinery

Axiomatic Technologies engineers robust machine control electronics, triaxial inclinometers, tilt sensors, and rotary laser receivers designed specifically for demanding off-highway, mining, construction, agricultural, and forestry equipment. Operating in extreme temperature ranges from -40°C to +85°C, our machine control hardware ensures continuous accuracy, high immunity to shock and vibration, and dynamic signal stability.

Product Sub-Categories

Machine Control & Sensing Solutions

Explore our industrial-grade tilt measurement devices, optical grade receivers, and multi-axis MEMS sensor controllers engineered for seamless integration into vehicle CAN networks.

Rotary Laser Receivers

Rotary Laser Receivers

40-Diode Array 190 mm Sensing Length Dual Beam Sensing

Engineered for automated grading and level control, the Rotary Laser Receiver features a high-density 40-diode linear detection array. It supports simultaneous detection of single or dual rotating laser beams for grading precision across construction and agricultural land leveling equipment.

  • Configurable resolution & bandwidth settings
  • Heavy-duty IP67 weatherproof enclosure
  • Direct integration with hydraulic level controls
Triaxial Gyroscope Inclinometers, M12 Connectors

Triaxial Gyroscope Inclinometers (M12)

3D Gyro Compensated ±180° Pitch/Roll Range CANbus Output

Designed for active machinery subject to severe vibration, shock, and dynamic acceleration. Integrated 3D gyroscopes real-time compensate MEMS acceleration measurements to provide dynamic tilt angles, pitch/roll/yaw rates, and 6-DOF inertial measurement data.

  • Standard M12 5-pin industrial connectors
  • SAE J1939 or CANopen protocol options
  • Advanced Kalman filtering firmware
Triaxial Inclinometers, DT13-4P Connector

Triaxial Inclinometers (Deutsch DT13)

Deutsch DT13-4P 3-Axis Sensing (X, Y, Z) High Shock Resistance

Utilizes advanced dual-axis MEMS accelerometer sensors combined with onboard signal processing to accurately compute 3D inclination angles over a full ±180° range. Fitted with rugged Deutsch connectors ideal for harsh vehicle chassis mounting.

  • Fully potted housing for maximum ingress protection
  • Configurable CAN ID and baud rate settings
  • Low-power industrial electronics architecture
Triaxial Inclinometers, M12 Connectors

Triaxial Inclinometers (M12 Connectors)

Industrial M12 Integrated Microcontroller ±180° Range

Compact multi-axis inclination sensors offering high angular accuracy and thermal stability. Internal high-performance microcontrollers perform real-time digital filtering, linearization, and CANbus frame formatting to reduce machine CPU load.

  • Configurable sampling rates and filtering algorithms
  • Sealed IP67 aluminum or composite housing
  • Ideal for boom angle, cab tilt, and chassis level
Triaxial Inclinometer, 3 Analog Outputs

Triaxial Inclinometer (3 Analog Outputs)

3 Analog Signals 0-5V / 4-20mA Options Direct PLC Interface

Provides reliable, continuous analog slope and tilt signal output for direct connection to legacy machine controllers, PLCs, or telemetry modules. Translates X, Y, and Z axis orientation into proportional voltage or current loop signals.

  • Isolated analog signal output stage
  • Factory-calibrated over full temperature spectrum
  • High EMI/EMC immunity for electro-hydraulic machines

Custom OEM Development

Need customized mechanical packaging, unique sensor ranges, or proprietary CAN protocols? Axiomatic provides full-service R&D engineering, rapid firmware adaptation, and certified manufacturing for specialized OEM builds.

  • Tailored CAN message mapping & diagnostic PGNs
  • Custom connector & mounting bracket interfaces
  • Validation to OEM environmental & EMC standards
Technical Matrix

Machine Control & Inclinometer Technical Comparison

Select the optimal sensor architecture based on connector style, motion compensation needs, and signal outputs for your off-highway vehicle application.

Technical specification overview for Axiomatic Machine Control and Tilt Sensor platforms. Consult specific model datasheets for full pinouts and electrical limits.
Product Series Sensing Axis Measurement Range Interface / Protocol Connector Type Ingress Protection
Rotary Laser Receiver Linear Array (40 Diodes) 190 mm Sensing Length CANbus / PWM Output Sealed Automotive Connector IP67 / IP69K
3D Gyro Inclinometer Triaxial (Pitch, Roll, Yaw) ±180° Full Orientation SAE J1939 / CANopen M12 5-Pin Connector IP67 Sealed Housing
DT13 Triaxial Inclinometer Triaxial (X, Y, Z) ±180° 3D Angle SAE J1939 CANbus Deutsch DT13-4P IP67 / Fully Potted
M12 Triaxial Inclinometer Triaxial (X, Y, Z) ±180° 3D Angle CANopen / SAE J1939 M12 Industrial Standard IP67 Heavy-Duty Body
Analog Output Inclinometer Triaxial (X, Y, Z) ±180° Proportional 0-5V / 0-10V / 4-20mA Deutsch / Cable Harness IP67 Metal Enclosure
Proven Engineering Quality

Robust Embedded Architecture for Extreme Conditions

Machine control applications demand unwavering reliability under continuous vibration, dynamic movement, and harsh climate exposures. Axiomatic designs all sensor circuitry, embedded software, and enclosures in-house to guarantee high operational availability on working machines.

  • 3D Gyroscope signal fusion algorithms eliminate vehicle dynamic acceleration noise
  • High-resolution 16-bit MEMS sensor processing for sub-degree accuracy
  • Extensive surge protection, reverse polarity, and short-circuit protection
  • Temperature-compensated factory calibration across -40°C to +85°C
  • Manufactured in ISO 9001:2015 certified facilities with full traceability
Axiomatic ISO 9001 certified electronics assembly and testing facility
Technical FAQ

Frequently Asked Questions

Common questions from design engineers and procurement teams regarding machine control and inclinometer selection.

Standard MEMS accelerometers can misinterpret vehicle motion, turning, or engine vibration as changes in inclination angle. Axiomatic dynamic 3D gyroscope inclinometers fuse rate-gyro data with accelerometer signals using proprietary sensor-fusion algorithms. This effectively filters out linear acceleration noise, ensuring accurate real-time pitch and roll readings even when equipment is actively moving.

Our machine control products support standardized SAE J1939 and CANopen protocols for seamless integration into vehicle CAN networks. Select series are also available with isolated analog output channels (0-5V, 0-10V, or 4-20mA) for direct connection to legacy controllers and instrumentation equipment.

Yes. All units feature rugged, potted construction sealed to IP67 or IP69K ingress protection ratings. They undergo comprehensive physical and electrical testing including mechanical shock, sinusoidal vibration, thermal shock (-40°C to +85°C), and high-level EMC compliance for off-highway vehicle installation.

Yes. Axiomatic specializes in custom OEM electronic design. Our engineering team can adapt firmware filtering parameters, customize CAN frame output rates and message PGNs, reconfigure connector orientations, or design full custom control hardware to meet exact machine production requirements.

Discuss Your Machine Control Architecture With Our Engineers

Whether you require standard CANbus inclinometers, specialized laser receivers, or custom OEM controller development, our technical team is ready to evaluate your machine specifications.

Inquire Now