Axiomatic Technologies Corporation designs and manufactures robust power conversion solutions built to withstand extreme mechanical vibration, thermal shock (-40°C to +85°C), heavy electromagnetic interference (EMC), and harsh moisture exposure in working equipment.
Whether adapting battery voltages on electric off-highway vehicles, driving heavy actuators via CAN-bus commands, or protecting sensitive telemetry ECUs against electrical load dump, our power management products deliver continuous, regulated output performance.
Select from standardized catalog platforms or contact our application engineering team for customized power conversion solutions optimized for your OEM architecture.
Isolated and non-isolated step-down, step-up, and voltage-stabilizing power converters for 12V, 24V, 48V, 72V, 96V, and 110V vehicle battery rails.
High-efficiency motion controllers for Brushed DC, Brushless DC (BLDC), and Stepper motors engineered for vehicle steering, pump, and actuator automation.
Intelligent, multi-stage onboard battery chargers designed for SLA, AGM, Gel, and Lithium-ion chemistry battery packs on hybrid/electric mobile equipment.
Heavy-duty AC and DC surge suppression modules built to absorb high-energy line surges, inductive load dump spikes, and electrostatic discharges.
Industrial AC-DC power supplies converting universal mains VAC input into clean, regulated 12VDC or 24VDC output power for control networks.
Tailored power electronics engineering including custom PCB layouts, specialized connectors, factory firmware programming, and rapid OEM validation.
Compare standard technical parameters across Axiomatic power management families to select the optimal model for your machine system architecture.
| Product Family | Nominal Input Range | Regulated Output | Power Rating | Control / Network Interface | Key Protection Features |
|---|---|---|---|---|---|
| Isolated DC-DC Converters | 12V, 24V, 48V, 72V-110VDC | 12V, 14V, 24V, 36V, 48VDC | 18W – 500W | SAE J1939 / CANopen / Telemetry | 1500V Isolation, Short Circuit, Reverse Polarity |
| Non-Isolated DC-DC Converters | 15V to 60VDC Input | 24VDC High Power Rail | 330W – 720W | Direct DC Power Distribution | Thermal Cutoff, Overcurrent, Overvoltage |
| BLDC & Brushed Motor Drives | 9V to 50VDC Operating | Variable PWM Power Output | Up to 40A Peak Current | CAN Bus, Analog 0-5V, PWM, NFC | Stall Detection, Over-temperature, Current Limiting |
| Industrial Battery Chargers | 12V, 24V, 48VDC Source | Multi-Stage SLA / AGM / Li-Ion | 1.2A to 25A Output | SAE J1939 CAN Bus Control | Charge Status Telemetry, Reverse Battery Guard |
| Transient Surge Protectors | 12V, 24V, 48V DC / 120V AC | Clamped Clean Voltage Rail | 10A Continuous Pass-through | Passive Protection Unit | Fast Transient Voltage Suppression (TVS), IP67 |
| AC to DC Power Supplies | 85VAC to 264VAC Mains | 12VDC or 24VDC Regulated | 60W – 240W Continuous | Standard Screw / Sealed Terminals | Inrush Current Limiting, Overload Protection |
Axiomatic offers DC-DC converters supporting nominal input voltages of 12V, 24V, 48V, 72V, 96V, and 110VDC. Regulated output options include 12V, 14V, 24V, 36V, 48V, 72V, and 120VDC with continuous power ratings ranging from 18W up to 720W.
Yes. Both isolated and non-isolated models are manufactured. Isolated converters feature dielectric strength isolation up to 1500VDC between input, output, and enclosure chassis, effectively preventing ground loops and shielding sensitive machine networks from power surge noise.
Selected models feature SAE J1939 or CANopen network interfaces. This allows central machine controllers to monitor real-time output current, input voltage status, internal operating temperature, diagnostic fault codes, and command remote output shutdown directly over the vehicle CAN network.
Products feature rugged aluminum or high-impact molded housings sealed to IP67 or IP69K standards using thermal potting. Units are fully qualified for mechanical shock, continuous vibration, extended temperature performance (-40°C to +85°C), and industrial electromagnetic compliance (EMC/EMI).
Yes. Axiomatic provides comprehensive OEM engineering services. We can modify existing platform designs or engineer custom hardware, firmware, and mechanical enclosures tailored to your equipment build requirements.
Get in touch with our engineering support team to request detailed technical datasheets, 3D CAD models, or custom design consultations for your machine power architecture.
